Powerwalker ViewPower PowerWalker Manuel d'utilisateur télécharger pdf (Page 33)

Diagram 5-10

Step 2 Password setting/change menu for ModBus. Real-time control will be available

when the ModBus password is the same to the UPS password.

Step 3 Com. port setting:

The default ID for nominated com. port is 1;

Selectable baud rates are 1200, 2400, 4800, 9600, and 19200. The default

setting is 4800;

Selectable data bit is 7 and 8. The default setting is 8;

Selectable stop bit is 1 and 2. The default setting is 1;

Supported parity is ODD parity, even parity and NONE. The default setting is

NONE.

NOTE:

This function is only available for the UPS with ModBus communication port.

5.2. UPS Setting

5.2.1. Local Shutdown

It’s shutdown setting for local PC which is directly connected to monitored UPS with

communication port. This configuration enables system shutdown of local PC or to

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 52 53

Pas de commentaire

Powerwalker ViewPower PowerWalker Manuel d'utilisateur Page 33